TROUBLESHOOTING / Troubleshooting B E-3 Engine is difficult to start at low tempera- ture. (During cold weather or in cold dis- tricts, engine is difficult to start or does not start even if pre-heated.) Check if electricity is routed to the glow plugs. Check the glow plugs for any abnormality. Check the battery. Check the wiring connections first. Measurement of Glow Plug Voltage and Resistance NOTE: If there is no malfunction on the fol- lowings and the engine is difficult to start with the engine cold, the fuel pump performance may become bad. YES Faulty coolant tempera- ture sensor. Disconnect connector of coolant temperature sensor. Check if voltage at glow plug is 20 to 24 V.
YES Faulty ECM. · Key switch: ON Connect terminal #10 in ECM to vehicle frame. Check if problem is cor- rected. NO · Connect to machine from the back of connector by using a clip with the con- nector connected. Measure each glow plug resistance. NO · Key switch: OFF · Before measuring, re- move copper plates connecting each glow plug. Voltage Check Resistance Check Remove the copper plate. Specification: 20 to 24 V T105-07-04-006 Specification: Below 10 Ω T105-07-04-007 T5-6-36