TROUBLESHOOTING / Troubleshooting B NO Faulty glow relay, or faulty harness between glow relay and glow plug. Connect connector in glow relay. Connect terminal #4 of harness end of connector to vehicle frame. Check if voltage at glow plug is 20 to 24 V. YES Open circuit in harness between glow relay and ECM. · Key switch: ON YES Disconnect connector in glow relay. Check if voltages at ter- minals #1 and #3 of har- ness end of connector in glow relay are 20 to 24 V. Less than 10 Ω · Key switch: ON If terminal #1 is 0 V, open circuit in 100A fuse or harness between glow relay and battery. If ter- minal #3 is 0 V, open circuit in fuse or harness between glow relay and terminal M in key switch.
Connector (Harness end of connector viewed from the open end side) NO ECM Connector #10 Glow Relay Connector #1 #4 #3 T1GR-05-04-002 T183-05-04-003 T5-6-37 10 Ω or higher Faulty glow plug.