hitachi — Engine System Troubleshooting

TROUBLESHOOTING / Troubleshooting B E-4 Even if accelerator pedal is depressed, en- gine speed remains unchanged. Related MC Fault Code: 11004-2, 11101-3, 11101-4 Check the wiring connections first. Turn the key switch OFF with the fan reversing switch ON. Turn the fan reversing switch OFF within 10 seconds and start the engine. When the machine travels, engine speed is fixed to idling speed. This condition is normal. Although the fan reversing switch is OFF, if the same trouble oc- curs, harness to the fan reversing switch or MC may be shorted. Faulty accelerator pedal, or open circuit in harness between accelerator pedal and MC. Check if fault code 11101-3 or 11101-4 is displayed.

Monitor accelerator pedal (standard voltage) by using Dr. ZX. Check if voltage is normal. YES YES Faulty CAN between MC and ECM. Check if fault code 11004-2 is displayed at the same time. · Key switch: ON · Standard voltage Slow idle position: 0.3 to 1 V Fast idle position: 4.0 to 4.7 V · Key switch: ON NO NO Faulty MC. T5-6-38