hitachi — Front Attachment SystemTroubleshooting

TROUBLESHOOTING / Troubleshooting B Monitor pump dis- placement propor- tional solenoid valve output of MC monitor item by using Dr. ZX. Check if output is 1 MPa (10 kg/cm 2 ) or less. To B YES Faulty MC. YES Check if pressure at port ST in main pump regulator is 2 MPa (20 kg/cm 2 ) or more. Check if main relief pressure is within specification. A NO · Accelerator pedal: Fully depressed · Front attachment: Operated · Engine: Running · Refer to Opera- tional Perform- ance Test section. · Accelerator pedal: Fully depressed · Front attachment: Operated Faulty main relief valve. NO YES Open circuit in har- ness in pump torque control solenoid valve or stuck spool.

B Disassemble and clean main pump regulator. Check if front attach- ment operation is normal. End. YES NO NO Faulty main pump. T5-6-43