TROUBLESHOOTING / Troubleshooting B F-13 Ride control is not effective. Check the wiring connections first. When there is trouble with main circuit system and system pilot oil in the lift arm cylinder, this trouble may occur. As the front attachment opera- tion malfunction together, refer to the related pages and execute the remedy. Ground terminal #7 of harness end of con- nector in ride control switch to vehicle frame. Disconnect connector MC-C. Ground terminal #C21 to vehicle frame. Check for continuity. YES Faulty MC. YES Disconnect connector in ride control switch. Check for continuity between terminals #6 and #7 of switch end.
Open circuit in har- ness between ride control switch and NO YES · Key switch: OFF · Ride control switch: ON Monitor ride control switch of MC monitor item on Dr. ZX. If ride control switch is turned ON/OFF, check if monitor dis- play is shifted. Faulty ride control switch. NO YES Normal. When travel speed is 7 km/h at former selec- tion, check if ride con- trol is effective. · Key switch: ON YES · Ride control switch: ON Monitor travel speed of MC monitor item on Dr. ZX. Check if travel speed is 7 km/h or faster. NO To B NO · Travel:
Forward To A NO Connector (Harness end of connector viewed from the open end side) Ride Control Switch Connector Connector MC-C Connector MC-A #A7 #A23 #6 #7 C23 #C21 C31 T183-05-04-008 T5-6-58 4 1 10 5