hitachi — Brake System Troubleshooting

TROUBLESHOOTING / Troubleshooting B Hold parking brake switch in OFF position. Check if voltage at terminals #1 and #2 of harness end of parking brake solenoid valve is 24 V. YES To D YES Open circuit in har- ness between ter- minal #1 of parking brake relay 2 and terminal #3 of park- ing brake switch. Install all electric parts, which are removed. Remove parking brake solenoid valve. Check for continuity at terminal #2 of harness end. NO YES · Engine: Running Check if voltages at terminal #3 of harness end of parking brake relay 2 and vehicle frame, at terminal #8 of parking brake switch and vehicle frame are 24 V re- spectively. C · Key switch:

OFF NO Open circuit in har- ness between ter- minal #2 and ground. · Engine: Running Open circuit in har- ness between ter- minal #8 of parking brake switch or ter- minal #3 of parking brake relay 2 and terminal #4 of park- ing brake relay 1. NO YES End. Disassemble, clean and adjust parking brake. Check if parking brake becomes normal. YES Keep hand away from parking brake switch. Check if voltage at terminals #1 and #2 of harness end of con- nector in parking brake solenoid valve is 24 V. Faulty parking brake solenoid valve. D NO · Engine: Running Open circuit in har- ness between ter- minals #1 and #5 of parking brake relay 2.

NO Connector (Harness end of connector viewed from the open end side) Parking Brake Solenoid Valve Connector #2 #1 T5-6-78 1 2