TROUBLESHOOTING / Troubleshooting B Disconnect connector in parking brake switch. Measure current at connector of switch end. Check if all questions are Yes. YES To B YES Install parking brake relay 1. Disconnect monitor connector 2-A in monitor unit. Check if voltage at terminal #2 of harness end of connector is 24 V. Faulty parking brake switch. NO YES · Discontinuity between terminals #6 and #7 with switch in neutral · Discontinuity between terminals #6 and #7 with switch OFF · Continuity between ter- minals #3 and #8 with switch OFF Remove parking brake relay 1. Check if voltages be- tween terminals #1, #3 of harness end and vehicle frame are 24 V. · Engine:
Running A Faulty alternator or faulty harness. NO · Key switch: ON NO Faulty fuse or faulty harness. Disconnect parking brake relay 2. Check for continuity between terminal #2 of harness end and vehi- cle frame. NO To C NO Connect monitor con- nector 2-A. Check for continuity between terminal #7 of harness end of parking brake switch and vehi- cle frame. Open circuit in har- ness between termi- nal #2 and ground. YES NO Check for continuity between terminal #18 of harness end of monitor connector 2-B and vehicle frame. · Engine: Running Faulty monitor unit. B YES · Key switch:
OFF Shorted circuit in harness between terminal #7 of parking brake switch connec- tor, terminal #18 of monitor connector 2-A and terminal #2 of parking brake relay connector. YES Parking Brake Switch Connector #3 #6 #7 #8 T5-6-77 4 1 10 5