TROUBLESHOOTING / Troubleshooting B BRAKE SYSTEM TROUBLESHOOTING B-1 Parking brake is not released. • Check the wiring connections first. NO To A YES Replace parking brake relays 1, 2 with other general relays. Check if parking brake is operated properly. · Engine: Running Faulty parking brake re- lay 1 or 2. NO Check if primary pilot pressure is within specification. YES · Engine: Running · Refer to Operational Per- formance Test section. NO Refer to F-1 and F-2 of Front Attachment Trou- bleshooting in this group. Check parking brake is actually operated. · Engine: Running · Forward/reverse lever: Neutral · Tow the machine slowly and the parking brake ON/OFF on order to check.
NO Refer to Troubleshooting C. Replace parking brake pressure sensor with normal one. Check if parking brake indicator goes off (brake is released). YES · Engine: Running End. YES Connector (Harness end of connector viewed from the open end side) Monitor Unit Connector A Parking Brake Relay 1 Connector Parking Brake Relay 2 Connector #A2 #2 #1 T183-05-04-013 #3 #3 #18 T183-05-04-003 T183-05-04-003 T5-6-76