hitachi — Travel System Troubleshooting

TROUBLESHOOTING / Troubleshooting B YES Faulty clutch cut-off posi- tion switch or faulty har- ness. · As for the harness in clutch cut-off position switch, the harness which correct current does not flow through is faulty. Faulty monitor unit. · Key switch: ON NO T5-6-75 Connect connector in clutch cut-off position switch. Disconnect monitor unit connector 1-B in monitor unit. Check if voltages at terminals #B28, #B29, #B30 and #B31 of harness end of con- nector are 4V, 3V, 2V and 1V respectively.