TROUBLESHOOTING / Troubleshooting B STEERING SYSTEM TROUBLESHOOTING H-1 Steering cylinder operation is slow or does not move. Check if the steering shaft is deformed or stuck. Install hoses to ports Pa and Pb in steering valve. Remove hoses from port A in right and left stop valve. Remove hoses from port A in right and left stop valves. Check if steering wheel is operated properly. YES To A NO Remove hoses from ports Pa and Pb in steering valve. Check if steering wheel is operated properly. Stuck spool in stop valve. YES NO · Engine: Running · Put oil into hydraulic oil pan from hose. · Engine: Running · Put oil into hydraulic oil pan from hose. YES Clogging in steering valve pilot circuit.
Check if steering handle is operated to right and left properly. · Engine: Running YES To B YES Check if front attach- ment operating speed is within specification. · Engine: Running · Refer to the Operational Performance Test section. Monitor pump pressure of MC monitor item on Dr. ZX. Check if steering relief pressure is within specification. NO To C · Engine: Running · Refer to the Operational Performance Test section. NO Faulty steering relief valve or faulty steering overload relief valve. NO T5-6-84