hitachi — Steering System Troubleshooting

TROUBLESHOOTING / Troubleshooting B Install hose to port A in stop valve. Check if pressure at port P in steering pilot valve is 3.7 +0.5 -0.3 KPa (38 +5 -3 kgf/cm 2 ). A YES End. Disassemble, clean and adjust pilot relief valve. Check if steering han- dle is operated prop- erly. · Engine: Running NO Stuck check valve or priority valve in charging block, or clogged pilot pump or pilot filter. NO YES End. Disassemble, clean and adjust priority valve (main pump). Check if valve is oper- ated properly. B Disassemble, clean and adjust steering valve. Check if valve is oper- ated properly. YES End. NO NO Faulty steering cylinder. YES End. Disassemble, clean and adjust main pump regu- lator.

Check if regulator is op- erated properly. C Faulty main pump. NO T5-6-85 YES Faulty steering pilot valve.