TROUBLESHOOTING / Troubleshooting B OTHER SYSTEM TROUBLESHOOTING O-1 Air conditioner malfunction The air conditioner has a self-diagnosis function. The self-diagnosis functions to: 1) Display Fault Codes 2) Change Displayed Fault Codes 3) Delete Fault Code 4) End Fault Code Display Display Fault Code 1. Push the fan OFF switch and turn the fan OFF. 2. Push and hold both upper and lower sides of the temperature control switch on the air conditioner control panel at the same time for more than 3 seconds with the key switch ON. Temperature Control Switch Fan OFF Switch NOTE: After operation has been performed, the buzzer will sound. 3.
If any fault codes are found, the LCD displays the fault codes as E {{ . NOTE: If more than one fault code is found, the lower number fault code will be displayed first. LCD Fault Code List T5-6-87 M178-0 Location in Trouble Fault Code Cause Symptom Abnormal circulation air sensor E11 Open circuit in air circulation sensor Value Y (air flow-in temperature) in re- sponse to the set-temperature is fixed. E12 Shorted circuit in air circulation sensor Abnormal fresh air sensor E13 Open circuit in fresh air sensor Operation is controlled under such cir- cumstance as no fresh air sensor is pro- vided.
E14 Shorted circuit in fresh air sen- sor Abnormal coolant temperature sensor E15 Open circuit in coolant tempera- ture sensor Operation is controlled under such cir- cumstance as the water temperature is set to 60 °C (140 °F). (Warm-up control is not performed.) E16 Shorted circuit in coolant tem- perature sensor Abnormal air vent sensor E21 Open circuit in air vent sensor Operation is controlled under such cir- cumstance as air flow-in temperature 0 °C (32 °F). E22 Shorted circuit in air vent sensor Abnormal damper E43 Abnormal air vent damper Corresponding damper servo becomes inoperable.
E44 Abnormal air mix damper Abnormal refrigerant E51 Abnormal high/low refrigerant pressure The compressor clutch is disengaged. (The compressor stops.)