hitachi — Other System Troubleshooting

TROUBLESHOOTING / Troubleshooting B Change Displayed Fault Code 1. When displaying more than one fault code, push either upper or bottom side of the temperature control switch. The following fault code is dis- played. Temperature Control Switch NOTE: Each time the displayed fault code is changed, the buzzer sounds. In case only one fault code exists, the displayed fault code remains unchanged. Delete Fault Code 1. Push, and hold both the circulation air switch and the fresh air vent switch for more than 3 seconds at the same time and the fault code is deleted. M178-01-017 LCD LCD NOTE: After the fault code is deleted, the buzzer sounds. 2.

After the fault code has been deleted, the LCD displays E {{ . End Fault Code Display 1. Push the fan OFF switch, and turn the fan ON. The self-diagnostic mode is completed. Circulation Air Switch Fresh Air vent Switch Fan OFF Switch Fan Switch T5-6-88 M178-0 M178-0