TROUBLESHOOTING / Troubleshooting B IMPORTANT: Always stop the engine when charging the air conditioner with refrigerant. Do not position the refrigerant container upside down during charging operation. When changing the refrigerant container during charging operation, purge air from the charge hose, as shown in step 10. Charge the low pressure side hose first. 6. Fully tighten the charge hose connection to the gauge manifold. Open the high pressure valve and refrigerant container valve to charge with refrigerant (R134a). Close the high pressure valve and refrigerant container valve when the high pressure gauge reading reaches 98 kPa (1 kgf/cm 2 , 14 psi).
High Pressure Gauge Tighten Open Open NOTE: Use warm water of 40 ° C (104 ° F) or less to warm the refrigerant container to aid in charging operation. IMPORTANT: Use the leak tester for R134a. 7. After charging, check the line connections for gas leaks by using leak tester (Parts Number 4360567). W115-02-10-007 W115-02-10-008 T5-6-102