TROUBLESHOOTING / Troubleshooting B IMPORTANT: If the pointer returns to 0, retighten the line connections and perform purging again. 3. When the low pressure gauge reading falls below -100 kPa (-755 mmHg), stop the vacuum pump and close the high and low pressure valves. Wait for approximately five minutes and confirm that the pointer does not return to 0. 4. With the high pressure and low pressure valves of the gauge manifold closed, connect the charge hose to the refrigerant container (Parts Number 4347644). 5. Loosen the charge hose connection to the gauge manifold and open the refrigerant container valve to purge air in the charge hose with the refrigerant pressure.
Close In Operation W115-02-10-005 Refrigerant Container W115-02-10-007 Loosen W115-02-10-007 T5-6-101 Close In pen