TROUBLESHOOTING / Troubleshooting B ONE PART OF DATA, “DAILY REPORT DATA”, “DISTRIBUTION DATA”, “TOTAL OPERATING HOURS” AND “ALARM” IS NOT RECORDED The required signal for data may not be sent to ICF. As each signal is used for some data, check the corresponding signal system according to the table below. Daily Report Data IMPORTANT: If the trouble occurs between each controller and sensor, the data cor- responding to this trouble is not re- corded in ICF. Although the machine is normal (The fault code is not displayed as for all controllers, the monitor dis- play and the machine operation are normal) and the required data is not recorded in ICX, execute this in- spection.
T5-6-112 Data Input Signal 1 Date Date of daily report data (Year/ Month/ Day) 2 Fuel level Fuel level when the engine stops at last in one day 3 Fuel used amount Fuel used amount in one day 4 Machine hour meter Total hours of hour meter 5 Engine operating hours Engine operating hours in one day 6 Travel operating distance Traveling distance in one day 7 Manual gear shifting operating hours Manual gear shifting operating hours in one day 8 Automatic gear shifting operating hours Automatic gear shifting operating hours in one day 9 L mode operating hours L mode in work mode selector switch operating hours in one day 10 N mode operating hours N mode in work mode selector switch operating hours in one day 11 P mode operating hours P mode in work mode selector switch operating hours in one day 12 Radiator coolant temperature Highest radiator coolant temperature in one day 13 Hydraulic oil temperature Highest hydraulic oil temperature in one day 14 Intake-air temperature Highest intake-air temperature in one day 15 Fuel temperature Highest fuel temperature in one day 16 Torque converter oil temperature Highest torque converter oil temperature in one day 17 Engine operating hours distribution Engine operating hours distribution in one day (Data is recorded only when alternator output signal is re- ceived for 10 minutes or longer.)