TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF HIGH BEAM INDICA- TOR Check the wiring connections first. YES Faulty high beam relay (AR3). Although dimmer switch is not in HIGH beam position, high beam indicator lights. Replace high beam relay (AR3) with parking brake relay (BR1). Check if high beam indi- cator goes out. Disconnect connector 2-B in monitor unit. Check if high beam in- dicator goes out. Faulty monitor unit. NO NO T5-7-14 YES Faulty high beam relay (AR3). Replace high beam relay (AR3) with parking brake YES relay (BR1). Disconnect connector of Check if high beam indi- head light switch. cator lights.
Check if voltage at terminal Although dimmer NO Check if voltage at ter- #2 of harness end connec- switch is turned to minals #1 and #3 in high tor is 0 V. HIGH beam position, beam relay (AR3) is 24 high beam indicator V respectively. does not light. Faulty fuse or open circuit in harness between fuse and NO high beam relay (AR3). YES Faulty high beam relay (AR3). Replace high beam relay (AR3) with parking brake YES relay (BR1). Check if high beam indi- cator lights. NO Faulty fuse or open circuit in harness between fuse and high beam relay (AR3). Connect the disconnected connector. Disconnect connector of YES head light switch. Check if high beam indicator goes out.