TROUBLESHOOTING / Troubleshooting C #23 of harness end con- nector is 24 V. between terminal #8 of working light switch end connector and vehicle frame. between working light relay 1 (AR8) and moni- tor unit. YES NO Disconnect connector of working light switch. Check if voltage at terminal #8 of harness end connector is 24 V. Faulty working light switch. · Working light switch: ON NO NO Open circuit in harness between working light relay 1 (AR8) and work- ing light switch. NO YES Faulty working light switch. Connector (Harness end of connector viewed from the open end side) Disconnect connector of working light switch. Check if indicator goes out.
Shorted circuit in har- ness between working light relay 1 (AR8) and working light switch. NO Monitor Unit Connector 1-B Working Light Switch Connector Working Light Relay 23 3 T183-05-04-003 T4GB-05-05-002 8 T5-7-17 YES Faulty working light relay 1 (AR8). YES Faulty working light.