hitachi — Malfunction of Clearance LightIndicator

TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF CLEARANCE LIGHT INDICATOR If the light is OFF and the clearance light and in- dicator light, the light switch may be faulty or the harness between light switch and clearance light or monitor unit may be shorted. Check the wiring connections first. Connector (Harness end of connector viewed from the open end side) Disconnect connector 1-B in monitor unit. Check if voltage at ter- minal #21 of harness end connector is 24 V. YES To A Check if clearance light lights. Indicator does not light. · Light switch ON Monitor Unit Connector 1-B T4GB-05-05-002 T5-7-40 Faulty light switch. NO YES Burnt indicator light.

A Open circuit in harness be- tween light switch and monitor NO unit. YES Burnt indicator light. Open circuit in harness be- tween light switch and monitor unit. #21