hitachi — Malfunction of Brake Low Oil PressureIndicator

TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF BRAKE LOW OIL PRESSURE INDICATOR When this trouble occurs, the fault code corre- sponding to the service brake pressure switch in monitor unit must be displayed. Refer to Trou- bleshooting A and conduct the remedy for this trouble. Although the fault cold is not displayed and if the trouble occurs, the monitor unit may be faulty. Service Brake Pressure Switch Pressure Voltage Operation 10 Mpa (82 kgf/cm 2 ) or higher 1.32 V or higher OFF Less than 8 Mpa (102 kgf/cm 2 ) Less than 1.15 V ON T5-7-41