Page 5 - 46 Section 5 – Maintenance Procedures CFP83 Series Procedure 34 Inspect Turbocharger Remove the air intake and the exhaust piping. Look for damaged or cracked compressor or turbine blades. Check to see that the turbocharger shaft spins freely. If the compressor impeller is damaged, inspect the intake piping and filter element for damage. Repair any damage before operating the engine. Remove the exhaust pipe from the turbocharger. Inspect the turbine wheel for damage. Replace the turbocharger if damage is found. Contact a Cummins Authorized Repair Location for replacement. NOTE:
If visual inspections or dimensional checks indicate a problem, contact a Cummins Authorized Location for Assistance. The turbocharger must be removed for replacement or rebuild if the clearances are beyond the limits. Install the air intake and the exhaust piping and tighten the clamps. Drawing No. 9777, Section 5, Rev. 02-07