Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 7 – Adjustment, Repair, and Replacement Page 7-31 CFP83 Series Coolant Hose Removal/Installation (Cont) All Ensure that the engine and engine coolant is cool in order to avoid burns. Remove the engine coolant pressure cap (Cummins Fire Power Part No. 11407). CFP83-F10, F20, F30 Only Open the aftercooler coolant vent. All NOTE : When draining coolant, drain only the amount needed for the required repair. Drain the engine coolant system. Refer to Drain and Flush Coolant System in Section 5. Remove the Upper Engine Coolant Hose NOTE : Refer to Assembly Drawing 8919 in Section 13 for detailed construction. Loosen the hose clamp at the heat exchanger. Loosen the hose clamp at the engine.

Pull the hose from the heat exchanger and engine. Drawing No. 9777, Section 7, Rev. 02-07