Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 7-32 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Coolant Hose Removal/Installation (Cont) Remove the Lower Engine Coolant and Fill Hoses NOTE : Refer to Assembly Drawing 8919 in Section 13 for detailed construction. Remove the nuts and U-bolt supporting the lower hose. Loosen the upper fill hose clamp at the heat exchanger. Loosen the lower engine coolant hose clamp at the heat exchanger. Loosen the lower engine coolant hose clamp at the engine. Pull the hoses from the heat exchanger and engine. Remove the Upper Coolant Heater Hose NOTE : Refer to Assembly Drawing 8930 in Section 13 for detailed construction. NOTE :

Be prepared to collect the residual coolant in the hose. Loosen the hose clamp at the coolant heater. Loosen the hose clamp at the engine. Pull the hoses from the coolant heater and engine. Disassemble additional components if this is required for inspection or repairs. Remove the Lower Coolant Heater Hose NOTE : Refer to Assembly Drawing 8930 in Section 13 for detailed construction. NOTE : Be prepared to collect the residual coolant in the hose. Loosen the hose clamp at the coolant heater. Loosen the hose clamp at the engine. Pull the hoses from the coolant heater and engine. Disassemble additional components if this is required for inspection or repairs. Drawing No. 9777, Section 7, Rev.

02-07