Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 7 – Adjustment, Repair, and Replacement Page 7-33 CFP83 Series Coolant Hose Removal/Installation (Cont) Remove the Coolant Vent Hose NOTE : Refer to Assembly Drawing 9658 in Section 13 for detailed construction. Loosing the fitting at the heat exchanger. Loosing the fitting at the engine. Pull the tubing from the connections. Inspect NOTE : Inspect the cooling system hoses and hose connection for leaks or deterioration. Particles of deteriorated hose can be carried through the cooling system and slow or partially stop circulation. Inspect the hoses and hose connections. Replace any hoses or clamps that are damaged. Clean any debris from the hose connections.

Install the Upper Engine Coolant Hose NOTE : Refer to Assembly Drawing 8919 in Section 13 for detailed construction. Position the hose clamps on the hose. Push the hose onto the heat exchanger and engine. Tighten the hose clamp at the heat exchanger. Tighten the hose clamp at the engine. Torque Value: As per capscrew markings and torque values in Section 10 Drawing No. 9777, Section 7, Rev. 02-07