Page 7-50 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Coolant Temperature Switch Removal/Installation (Cont) Follow-Up Fill coolant to proper level. Refer to Drain and Flush Cooling System in Section 5. Start the engine. Refer to Normal Local Starting Procedure in Section 3. Check for leaks. Repair any leaks. Check that engine operating temperature stabilizes between 82 and 94 o C [180 and 201 o F]. If temperature does not stabilize, stop the engine and refer to Coolant Temperature Above Normal or Coolant Temperature Below Normal (Engine Running) in Troubleshooting Section 12. Drawing No. 9777, Section 7, Rev. 02-07