Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 7-60 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Coolant Water Pump Removal/Installation (Cont) Drain engine coolant as required for the intended service. Refer to Drain and Flush Coolant System in Section 5. Disconnect the lower engine coolant and fill hoses. Refer to Coolant Hose Removal/Installation in this section. Remove the Belt Guard. Refer to Belt Guard Removal/Installation in this section. Remove the Drive Belt. Refer to Belt Removal/Installation in this section. Disconnect the upper engine coolant hose. Refer to Coolant Hose Removal/Installation in this section. Loosen the capscrew for the alternator link at the alternator.

Refer to Alternator Removal/Installation in this section. Remove Remove the two lower capscrews at the water pump. Slide the alternator link aside. Remove the upper capscrew, the water pump and the o-ring seal. Drawing No. 9777, Section 7, Rev. 02-07