Section 7– Adjustment, Repair, and Replacement Page 7-85 CFP83 Series Battery Removal/Installation (Cont) Remove NOTE : Use the correct battery tools. Use end wrenches to loosen the battery clamps. Use a battery cable puller to remove tight cable clamps from the battery terminal. Use a battery carrier to lift and carry the battery. Remove any battery support hardware. WARNING To reduce the possibility of arcing, remove the negative (-) battery cable first. Loosen the battery cable clamps. Remove the negative battery cable first. Remove the positive battery cable first. WARNING Do not tip the battery and spill the acid . Using a battery carrier, lift and remove the battery.
If disposing of the battery, dispose of it in accordance with all applicable environmental regulations. Clean NOTE : Use the correct battery tools. Use a terminal cleaning brush for the battery terminal. Use a putty knife and wire brush to remove dirt and corrosion from the battery body and any support. Clean the battery posts to remove all corrosion and to expose the metal. Remove any other corrosion or debris from the battery body or battery support. Drawing No. 9777, Section 7, 02-07