Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 7-88 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Check Battery Cables and Connections Drawing No. 9777, Section 7, Rev. 02-07 WARNING Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. WARNING To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. NOTE: There are two possible heavy-duty battery connections: Battery terminal and clamp Threaded battery terminal and nut Remove and inspect the battery cables and connections for cracks or corrosion. Replace broken terminals, connectors, or cables.

If the connections are corroded, use a battery brush or wire brush to clean the connections until shiny. Alternatively, if a brush won’t do the job, use an acid neutralizing solution to remove the corrosion. Brush or wipe all residue or debris from the terminals. NOTE: Coat the terminals with a high temperature grease to prevent corrosion. Install the cables and tighten the battery connections.