Section 7 – Adjustment, Repair, and Replacement Page 7-117 CFP83 Series Fuel Injection Pump, In-Line, Spill Port Timing (Cont) Remove the fuel pump timing pin plug. Reverse the position of the pin and install the pin, plug, and sealing washer. Torque Value: 24 N•m [18 ft-lb] Tighten the fuel pump drive nut. Torque Values: P7100 Pump 178 N•m [131 ft-lb] A Pump 95 N•m [70 ft-lb] EP9 Pump 127 N•m [94 ft-lb] Install the gear cover access cap hand-tight. Install the fuel pump mounting bracket capscrews finger-tight. Install support mounting capscrews finger-tight. Make sure alignment is correct and tighten capscrews. Torque Value: 24 N•m [18 ft-lb] Drawing No. 9777, Section 7, Rev. 02-07