Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 7 – Adjustment, Repair, and Replacement Page 7-127 CFP83 Series Air in Fuel (Cont) NOTE : Since the fuel pump provides a positive pressure through the fuel filter and supply line to the fuel injection pump, loose connections or defective seals should show as a fuel leak, not as an air leak. NOTE : A stuck-open injector can also blow combustion gas back into the pump and cause air to be present in the overflow. If the engine seems to be misfiring or running rough, break all the injector supply lines loose at the pump end. Crank the engine, and observe the lines. If combustion gas seems to be blowing back through the line, the injector is stuck open. Remove the injector.

Take the engine to an Authorized Cummins Repair Facility/Dealer Location for testing. Torque Value: 24 N•m [212 in-lb] NOTE : Use two wrenches when loosening the lines at the fuel pump: One to hold the delivery valve and one to loosen the fuel line. Disconnect the fuel line from the outlet of the fuel filter. Drawing No. 9777, Section 7, Rev. 02-07