Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 7 – Adjustment, Repair, and Replacement Page 7-137 CFP83 Series Fuel Drain Manifold Removal/Installation Refer to Fuel Manifold (Drain) (41-006-021-tr) in C Series Troubleshooting and Repair Manual, Bulletin No. 3666003. Prepare Inline Pumps NOTE : Use new seals and sealing washers. Assemble the drain line and drain manifold in the reverse order of removal. Torque Values: (Banjo Fitting Screw) 15 N•m [133 in-lb] (Banjo Fitting) 9 N•m [80 in-lb] (Bracket Capscrew) 24 N•m [18 ft-lb] Remove Rotary Pumps Remove the capscrew from the hold-down clamp. Remove the banjo fitting screws and washers. Disconnect the drain line fitting from the injection pump.

Remove Inline Pumps Remove the drain line banjo capscrew from the fuel filter head. Remove the capscrew from the bracket on the intake cover. Remove the banjo capscrews from the injectors. Drawing No. 9777, Section 7, Rev. 02-07