Page 7-138 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Fuel Drain Manifold Removal/Installation (Cont) Install Rotary Pumps NOTE : Use new seals and sealing washers. Assemble the drain line and fuel drain manifold in the reverse order of removal. Torque Values: (Banjo Fitting Screw) 15 N•m [133 in-lb] (Banjo Fitting) 9 N•m [80 in-lb] (Clamp Screw) 24 N•m [18 ft-lb] Install Inline Pumps NOTE : Use new seals and sealing washers. Assemble the drain line and drain manifold in the reverse order of removal. Torque Values: (Banjo Fitting Screw) 15 N•m [133 in-lb] (Banjo Fitting) 9 N•m [80 in-lb] (Clamp Screw) 24 N•m [18 ft-lb] Follow-Up Drawing No. 9777, Section 7, Rev. 02-07