Page 7-154 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Intake Air Cleaner Element Removal/Installation CAUTION Never operate the engine without an air cleaner. Unfiltered foreign objects could cause engine damage. Check Air Restriction Indicator. Replace the air cleaner element when the restriction reaches the maximum allowable limit, or clean according to the manufacturer's recommendations. See Air Cleaner Restriction Removal/Installation this section. Turbocharged engines must be operated at rated RPM and full load to check maximum intake air restriction. Maximum intake air restriction is 762 mm H2O [30.0 in H2O] for turbocharged engines. Loosen air cleaner clamp.
Remove the air cleaner element. Clean and Inspect for Reuse Inspect the air cleaner for cuts, cracks, holes, or excessive debris. Clean or replace if necessary. See Air Intake System Specifications in Section 10 for correct Cummins Fire Power replacement part number. Check for corrosion of the intake system piping under the clamp. Corrosion can allow corrosive products and dirt to enter the intake system. Drawing No. 9777, Section 7, Rev. 02-07