Page 7-164 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Fill CAUTION During filling, air must be vented from the engine cooling passages. Open the engine vent petcock. Make sure to open the petcock on the aftercooler for aftercooled engines. The system must be filled slowly to prevent air locks. Wait 2 to 3 minutes to allow air to be vented; then add coolant to bring the level to the bottom of the radiator filler neck. Failure to do so will cause entrapment of air in cooling system and will cause engine to overheat. Fill the coolant system with a mixture of 50- percent water and 50-percent ethylene-glycol- type antifreeze.
Aftercooler Removal/Installation (Cont) Follow-Up Drawing No. 9777, Section 7, Rev. 02-07