Page 7-176 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Turbocharger Oil Supply Line Removal/Installation Prepare Remove Remove Remove the oil supply line from the oil filter head (1). Remove the oil supply line from the turbocharger bearing housing (2). Inspect for Reuse Inspect the line for cracks, wear, and damage. Inspect o-rings for cracking and fretting. Replace as necessary. Install Apply a thin film of oil to the o-ring seals. Fill the turbocharger oil inlet with clean oil. Install the oil supply line at both the filter head and the turbo bearing housing. Tighten the oil supply line to final torque. Torque Value: 24 N•m [18 ft-lb] Follow-Up Drawing No.
9777, Section 7, Rev. 02-07