Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 7 – Adjustment, Repair, and Replacement Page 7-189 CFP83 Series Lubricating Oil and Filter Analysis Inspect An analysis of used oil can help diagnose internal engine damage and determine if it was caused by one of the following: Intake air filter malfunction Coolant leaks Oil diluted with fuel Metal particles causing wear For additional oil analysis information, Refer to Cummins Engine Oil Recommendations, Bulletin 3810340. NOTE : Do not take apart an engine for repair based solely on the results of an oil analysis. Inspect the oil filters. If the oil filter shows evidence of internal damage, find the source of the problem, and repair the damage.

Refer to the appropriate procedure(s) based on the following oil filter inspection. WARNING Restrain the full flow lubricating oil filter, and carefully cut the filter (upper section of combination filter) open. The filter element spring is under compression and can cause personal injury. Drawing No. 9777, Section 7, Rev. 02-07