Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 10-4 Section 10 – Maintenance Specifications CFP83 Series Fuel System Specifications Lubricating Oil System Specifications Cooling System Specifications Drawing No. 9777, Section 10, Rev. 02-07 Fuel Type Number 2 Diesel Only Recommended primary fuel filter Fleetguard FS1251 Metric US Minimum supply line size 9.5 mm D. 0.375 in. D. Minimum drain line size 6.4 mm D. 0.25 in. D. Maximum fuel line length between supply tank & fuel pump 12 m 40 ft. Maximum fuel height above C/L crankshaft 2030 mm 80 in. Maximum restriction @ lift pump-inlet - with clean filter 102 mm Hg 4.0 in. Hg Maximum restriction @ lift pump-inlet - with dirty filter 203 mm Hg 8.0 in.

Hg Maximum return line restriction - without check valves 254 mm Hg 10.0 in. Hg Minimum fuel tank vent capability 0.342 m3/hr 12 ft3/hr Maximum fuel temperature @ lift pump inlet 71 oC 160 oF Recommended lube oil filter Fleetguard LF9009 Metric US Oil pressure range at rated 276-414 kPa 40-60 PSI Oil capacity of pan (high - low) 18.9-15.1 litre 20-16 U.S. quarts Total system capacity 23.8 litre 6.3 U.S. Gal. Recommended coolant filter Fleetguard WF2072 Metric US Maximum raw water working pressure range at heat exchanger 414 kPa 60 PSI Recommended minimum water supply pipe size to heat exchanger 25.4 mm D. 1.0 in. D. Recommended minimum water discharge pipe size from heat exchanger 31.7 mm D.

1.25 in. D. Coolant water capacity (engine side) 22.2 Litre 5.9 U.S. gal. Modulating thermostat range 82-95 oC 180-203 oF Minimum raw water flow with water temperatures to 90 oF (32 oC) 1.9 litre/s 30 U.S. GPM