Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-14 Section 12 – Troubleshooting CFP83 Series Coolant Temperature Above Normal (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Lubricating oil is contaminated with coolant or fuel. Check the appearance of the lubricating oil. If the color and texture is abnormal, refer to the Lubricating Oil Contaminated symptom tree. Cooling system hose is collapsed, restricted, or leaking. Inspect the hoses. Refer to Check Hose Condition in Section 5. Replace any damaged hoses. Refer to Coolant Hose Removal/Installation in Section 7. Coolant mixture of antifreeze and water is not correct. Verify the concentration of antifreeze in the coolant.

Refer to Check Cooling System Condition in Section 5. Add antifreeze or water to correct the concentration. Refer to Coolant Recommendations and Specifications in Section 10. Lubricating oil level is above or below specification. Check the oil level. Refer to Check Engine Oil Level in Section 5. Add or drain oil, if necessary. Coolant temperature sender is malfunctioning. Check for an open or short circuit at the temperature sender. If required, replace the temperature sender. Refer to Coolant Temperature Sender Removal/ Installation in Section 7. Coolant temperature gauge is malfunctioning. Replace the temperature gauge. Refer to Coolant Temperature Gauge Removal/Installation in Section 7.