Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 12 – Troubleshooting Page 12-69 CFP83 Series Engine Will Not Reach Rated Speed (RPM) (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Fuel supply is not adequate. Locate and correct the restriction in the customer- supplied fuel lines to the engine. Exhaust back pressure is too high. NOTE: The maximum allowable exhaust back pressure is specified in Exhaust System Specifications in Section 10. Measure the exhaust back pressure. Correct the problem if it is above specification. The fuel lift pump is malfunctioning. Inspect the fuel lift pump. Replace if necessary.

Refer to Fuel Lift Pump (005-045) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Turbocharger wastegate is malfunctioning (CFP83- F40 Only). Check the wastegate for correct operation. Refer to Turbocharger Wastegate Actuator (010-050) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel injection pump timing is incorrect. Check and adjust the injection pump timing. Refer to Fuel Injection Pumps, In-Line (005-012) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel injection pump is malfunctioning. Replace the fuel pump.

Refer to Fuel Injection Pumps, In-Line (005-012) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02.