Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-86 Section 12 – Troubleshooting CFP83 Series Lubricating Oil Consumption Excessive Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Verify the oil consumption rate. Check the amount of oil added versus the hours of operation. An external engine leak is present. Inspect the engine and its components for seal, gasket, tappet cover, oil cooler, or draincocks leaks. Repair or correct any leaks. Crankcase ventilation system is plugged. Check and clean the crankcase breather and vent tube. Refer to Crankcase Breather Tube (003-018) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02.

Lubricating oil does not meet specifications for operating conditions. Change the oil and filters. Refer to Change Lubricating Oil and Filters in Section 7. Use the oil type recommended in Lubricating Oil Recommendations and Specifications in Section 10. Lubricating oil cooler is leaking. Check the lubricating oil cooler for coolant leaks. Refer to Lubricating Oil in the Coolant in this section. Turbocharger leaking lubricating oil to the air intake or exhaust. Inspect the air crossover tube for evidence of lubricating oil transfer. Refer to Air Crossover (010- 019) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Lubricating oil drain interval is excessive.

Verify the correct lubricating oil drain interval. Refer to Change Lubricating Oil and Filters in Section 5.