Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 3-40 Section 3 – Installation and Operation CFP83 Series Rated Speed Setpoint Adjustment (CFP83-F40) (Cont) To increase the rated speed, turn the bolt clockwise on the right side of the throttle bracket. The adjustment of the bolt will pivot the throttle bracket to allow more fuel through the pump to speed up the engine. The nut on the right, closest to the bracket will need to be tightened to lock in the adjusted speed set point. 8708-cfp83 Rated speed adjustment Loosen lock nuts and turn threaded bolt clockwise to allow for more RPM speed. When rated speed is correct, tighten lock nut against stop. To decrease the speed, turn the threaded bolt counter-clockwise.

The adjustment of the bolt in a counter-clockwise direction will allow less fuel to flow through the pump to slow down the engine. When rated speed is correct, tighten the locking nut against the stops. Stop the engine. Start the engine. Observe that the engine starts and accelerates to the rated speed setpoint. Stop the engine. Repeat the above adjustment until the desired speed is attained. Drawing No. 9777, Section 3, Rev. 02-07