Page 3-58 Section 3 – Installation and Operation CFP83 Series Emergency Manual Mode Non-Electrical Start (CFP 83-F10, F20, F30) Starting the Engine Open both manual valves in the raw water bypass supply piping. Throttle cable assembly is provided to allow the operator to start the unit in manual mode. The Throttle cable assembly is located on the fuel pump side of the engine and has a pull handle that is attached to the fuel pump lever which activates the fuel solenoid shut- off (FSO). ThrottleCable The throttle cable assembly is factory installed and is securely fastened to the fuel pump lever in position shown to allow engine to run in closed/automatic mode.
Emergency Manual Mode Non-Electrical Start (CFP 83-F10, F20, F30) (Cont) Drawing No. 9777, Section 3, Rev. 02-07