Section 3 – Installation and Operation Page 3-61 CFP83 Series Emergency Starting in Automatic Mode with Failed Fuel Shut-Off Solenoid Throttle Cable assembly will be provided to allow the operator to start the unit in manual mode. The Throttle Cable assembly is located on the fuel pump side of the engine and has a pull handle that is attached to the fuel pump lever which activates the fuel solenoid shut- off (FSO). The throttle cable assembly is factory installed and is securely fastened to the fuel pump lever in position shown to allow engine to run in closed or automatic mode.
In the event the Fuel Shut-off Solenoid has failed, pull on the throttle handle assembly which will move the lever to the run position to start the engine. Run Turn handle assembly to lock cable assembly in position to allow the engine to run. Closed Drawing No. 9777, Section 3, Rev. 02-07 ThrottleCable