Page 3-62 Section 3 – Installation and Operation CFP83 Series Emergency Starting in Automatic Mode with Failed Fuel Shut-Off Solenoid (Cont) Stopping the Engine Retract the throttle cable to the closed or automatic position to allow the engine to stop. Once engine is operational and fuel solenoid has been replaced, the cable assembly to be restored in the closed or automatic mode. The engine is now ready to run in automatic mode. NOTE : If throttle cable assembly does not retract to correct closed position, manually push the lever to the closed or automatic position and adjust the throttle cable assembly so that when activated, it opens and closes the FSO lever accordingly.
Periodic inspection of the throttle cable assembly is recommended. Drawing No. 9777, Section 3, Rev. 02-07