Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION pre-heating pilot lamp (3) on the monitor the the pre-heating pilot Ambient temperature Pre-heat time -10 ° C to -20 ° C (14 ° F to -4 ° F) 15 to 32 seconds -3 ° C to -10 ° C (27 ° F to 14 ° F) 5 to 15 seconds -20 ° C to -30 ° C (-4 ° F to -22 ° F) 32 to 45 seconds 6. When the engine starts, release the key in starting switch (2). The key will return automatically to the ON position (B). REMARK Immediately after an engine startup, keep the engine idling, and while the engine is idling, keep the foot off the deceleration pedal and do not operate the work equipment. 3 - 90 3. Chec panel lights up. 4. Maintain the key in lamp (3) goe s off.

on position unti 5. When preheating pilot lamp (3) goes off, turn the key of ignition switch (2) to the START posi tion (C ) to cra nk the engine. The ti me tha t preheating pilot lamp ( 3) stays on changes according to the ambient temperat ure as shown in the table below.