Komatsu — OPERATIONS AND CHECKS AFTER STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION Continue to run the engine under a light load until engine coolant temperature gauge indicator (2) is within the green range (B). (A): White range (B): Green range (C): Red range 3. Check for abnormal exhaust gas color, noise, or vibration. If any problem is found, contact your Komatsu distributor. STARTING IN COLD WEATHER (Ambient temperature below 10 ° C (50 ° F)) 3 - 93 2. After warm-up is completed, check gauges and caution lamps for proper operation. If any p NOTICE When the hydraulic oil is at a low temperature, do not carry out o o D perations or move the levers su ddenly. Always carry out the warm-up peration.

This will help to exten o not suddenly accelerate the e d the machine life. ngine before the warm-up operation is c D ompleted. o not run the engine at low idle o r high idle con-tinuously for more than 2 s If o 0 minutes. This will cause leak upply piping. age of oil from the turbocharger oil oil it is necessary to run the engine at idle, apply a load from time to time r run the engine at a mid-range speed. 1. Turn fuel control dial (1) to th e mid point between the low idling speed (MIN) and full speed (MAX) to start up the engine.

REMARK The machine holds an engine re volution at 1200 rpm by means of its e ngine cooling water warmin g-up function until after the engine cooling water temperature reach es 30°C (86°F). ion, see "STARTING IN COLD For