Fig. 7 Electric System 1. Battery 2. Starting motor 3. Electric plunger 4. Preheating - starting switch 5. Ammeter 6. Key switch 7. Pressure gauge 8. Temperature gauge 9. Voltage regulator 10. Silicon rectified generator 10. Transmission System The transmission system includes the common V belt transmission and the gear transmission in the gear housing. The crankshaft belt pulley drives the water pump different specification of belt length: 81168, 81143 and 81080 according to the dif- belt pulley and the alternator belt pulley through the II 8" type V belt. There are three ferent positions of the water pump and the alternator. The belt is tightened by the alternator adjusting frame.
When we press the middle part of the V belt using the finger, 10 -15mm should be pressed down. The transmission gears are all slanted gears in which the crankshaft timing gear, camshaft timing gear, fuel pump gear and idli(1g gear have timing mark. We should align the mark when installing, otherwise, it will affect the normal operation serious- ly for the incorrectness of fuel advance angle, and even cant start the engine. · 40·