CHAPTER m OPERATION OF THE DIESEL ENGINE 1. Transportation & installation When the diesel engine is transported, the front and rear lifting bracket should be used to lift the engine and close attention should be paid to protect the appearance, accessories and oil pipes of the diesel engine from being damaged. If the diesel engine will be transported for a long distance, the air filter and silencer water pump inlet and outlet hole, fuel inlet and outlet hole. If necessary, use plastic should be dismantled, use plugs .and plastics to seal the air intake and exhaust hole, cover and wooden case to pack the diesel engine.
If the diesel engine is used for stationary application, the foundation must be firm, to the requirement of stipulation, the working place should be spacious, well wenti- the mounting surface must be kept horizontal,the driving equipment should conform lated, clean and rain - proof. 2. Fuel, lubricationg oil and cooling water 2.1 Fuel The diesel engine shoul~ adopts diffeent brand of light diesel oil according to the at- mospheric temperature ( GB252 -1994) Atmospheric temperature ( °C) : >0 o -.. -10 -10 -.. - 20 - 20 -.. 35 Brand of diesel oil:
o -10 -20 -35 The fuel oil must be kept, very clean, befor fil1ing it into the fuel tank, you should clear ted to the bottom, then pich up the top clean fuel oil. the fuel oil must be strictly fil- the fuel oil for over 3 days so as to make the dust and water inside the oil precipita- tered when filled to the fuel tank. 2.2 Lubricationg oil The diesel engine should adopt different brand CC or DD diesel lubricating oil accord- ing to different area and atmospheric temperature. 44