(5 ) Cylinder blows by (4 ) Check and adjust the governor ( 6) Uneven fuel delivery to each (5 ) Check the tightening torque of the cylinder cylinder head bolt and the seal of (DUneven fuel delivery to each cylin- thecylinder head gasket (2)lnjector sprays not well or the ma- der in injection pump ( 6 ) (DCheck and adjust (2)check the spray quality of the in- te be choked jector, replace the mate if necessa- @The plunger of the injection pump- ry worn out or the spring broken @Check and replace 3. Output is insufficient or drops suddenly Trouble cause and its feature Remedy 'j ( 1) Air filter .choked (2) Valve spring or push rod bro- 1. Clean or replace filter element 2.
Check and replace ken 4. Handle according to 1.2 5. Check and adju~t 3. C~eck and adjust (3 ) Valve lash is inCorrect ( 4) Compress pressure is insuffi- cient (5) Fuel delivery advance angle is 6. Handle a ccoyding to (1) ,(2) ,(3) (6 ) Air trapped in the fuel system incorrect 7. Check the plunger of the injection in 1.1 or pump and fuel outlet valve thd system is choked (7) Fueldelivery is insufficient .~." Check,clean and adjust the pressure 9. Test and repair the governor (9) Governotr works abnormally (8) Injector spray not well 10. Test and repair thd cooling sys - tem ,wipe off the scale ( 10) Engine overbeated 11.
Clean off the carbon deposit ( 11 ) Too much carbon deposited ( 12) Exhaust manifold, not expe- inside the engine 12. Find out the fault and eliminate it. dite 4. Abnormal noise during engine operation Trouble cause and its featre ( 1) Injecting time is too early to Remedy 1. Adjust the fuel delivery advance 53