Weichai — Weichai 495 Series Diesel Engine Operation and Maintenance Manual

cause the rhythmic and clear metal- aAgle lic pounding noise be heard inside the cylinder. (2) Injecting time is too late to cause 2. adjust the fjel delivery advance angle the grave and unclear noise is heard in- side the cylinder. (3) Pounding noise can be heard inside 3. Check the cylinder clearance, replace the cylinder after the engine starts be- the piston or cylinder liner cause of too large gap between the pis- ton a,nd cylinder liner, this noise gets gine. lower along mith the warming of the en- (4) Too large. clearance 'between the pis- 4. Replace the parts, ass ure the stipula- ton pin and pinhole, clear and sharp ted gap sound, especialy when idling.

main bearing and the con - rod bearing, 5. Replace the parts, assure the stipula- (5 ) Too large clearance between the parts pounding sound is heard when the ted gap engine speed drops suddenly, grave and strong sound when at low speed. large, pounding noise when idling. lated gap (7) Valve spring broken, push rod bent, ( 6) The axile gap of the crankshaft is too 6. Replace the thrust plate, assure stipu- valve clearance too large and so on, dis- 7. Replace the parts, adjust valve gap orderly sound or lignt and rhythmic poun- ding sound be heard inside the cylinder head cover. ( 8) Piston touches valve, metallic poun- 8.

Check valve clearance and transmitting ding sound can be heard qeside the cyl- gear mark inder head sound is heard at the gear case when according to the situation (9 ) Too large gear clearance, pounding 9. Test the gear back lash, replace gear the speed · 54